With a 293Wh power capacity, Jackery Explorer 300 Portable Power Station (Refurbished) can power small appliances and charge up to six smart devices at once. It provides a super fast recharge time of 2.5 hours using the combination of a 90W wall charger and a 60W USB-C PD Charger. Featuring a pure sine wave inverter, and built-in BMS, the power station protects sensitive devices while charging.
Updated Multifunctional Outputs
With a power capacity of 293Wh, the Jackery Explorer 300 Portable Power Station (Refurbished) can power small electrical devices like drones, mini-coolers, TVs, CPAP machines and so on. The updated multifunctional outputs, including two pure sine wave AC outlets, a 60W type C PD port, and a QC 3.0 port, help you power six smart devices simultaneously.
Light (5W)
24 H
Camera (8.4W)
13 Charges
Bluetooth Speaker (10W)
19 H
Phone (18W)
16 Charges
CPAP (28W)
7 H
Electric blanket (55W)
4 H
Drone (90W)
5.8 ChargesRunning Time Simulator
To power with Explorer 300 (293Wh Capacity)
Please enter the wattage of the appliance (not exceeding 300W)
W
0
Hrs
3 Different Charging Modes
3 Different Charging Modes
Long-Lasting Power Solution
Excellent BMS Protection
Excellent BMS Protection
Portable and Stylish
Easy-to-use and Reliable Power
Easy-to-use and Reliable Power
Eco-Friendly Quiet Power Solution
6 Months Warranty
6 Months Warranty
PREPARING YOUR SOLAR GENERATOR
The Explorer 300 (Refurbished) can be recharged under straight full sun in 3.5 hours from 0-80% by connecting a SolarSaga 100W solar panel.
Solar recharging steps:
1. Find the DC interface on the back of SolarSaga 100;
2. Connect the DC interface of SolarSaga 100 with DC input of Explorer 300
Notes:
1. Solar panel types and quantity depends on your purchase.
2. Buy 2 SolarSoga, get 1*Solar Panel Connector.
3. Buy 4 or 6 SolarSoga, get 2*Solar Panel Connectors.
* This product (portable power supply) can supply power to your device in the temperature range of -10 to 40 degrees Celsius (-10 to 65 degrees Celsius for solar panels). If the operating temperature is outside the above range, this product may not work.
A: Please note that the AC output port can only charge/power devices that operate at less than 300-Watt. Besides, the whole wattage should be under 300 watts as well . Once exceeding, the Explorer 300 will shut off automatically. Please refer to your device specification before purchase.
A: Working time = 293Wh* 0.85 / operating wattage of your device
For reference, assuming power consumption of your device is 30W (might be a box fan), working time will be 293Wh*0.85/30w=8.3hrs (rough calculated) .
Please note: actual power consumption varies from different usages, please consult Jackery for better purchase decision.
A: Yes, you can use the Explorer 300 to charge other things, while it's being recharged at the same time.
