What devices can the Explorer 300 v2 power?

The Explorer 300 v2 provides up to 300W of AC output with a pure sine wave at 120V, 60Hz. It is well suited for powering small electronics such as laptops, tablets, drones, cameras, portable fans, and lights. Expert Tip: Avoid using high-wattage heating appliances such as coffee makers or hair dr...

Can I use this as a backup power source for my computer?

Yes! One of the standout upgrades in the v2 is the Uninterruptible Power Supply (UPS) feature. When the unit is connected to a wall outlet and your device is plugged into the AC port, it enters "bypass mode". If the grid goes down, the power switches to the internal battery in j...

Why did my Jackery turn off while I was still charging my device?

This is likely due to the Energy Saving Mode. If enabled (switch to the right): The unit will automatically shut down all outputs after 6 hours if the power consumption remains below 25W for AC or 2W for USB/DC ports. To disable: Slide the switch to the left if you need to power low-wattage devic...

How fast can I recharge the Explorer 300 v2?

The Explorer 300 v2 is designed for rapid recovery so you can get back to your adventure faster. Here are the typical recharge times to reach 100% capacity: AC Wall Charging: Approximately 76 minutes using a standard wall outlet. Car Charging (12V): Approximately 242 minutes (about 4 hours) via y...

Is the car charging cable included in the box?

The standard package includes the Jackery Explorer 300 V2 unit, an AC Charging Cable, and the User Manual. Please note that the car charging cable is not included but is available for purchase separately if you plan to charge while on the road.

Can I use the Explorer 300 v2 in the rain or at the beach?

While built for the outdoors, this device is not waterproof or dustproof. It is intended for indoor use or "indoor-like" environments such as tents, RVs, or cabins. Always keep the unit in a cool, dry place and ensure the vents are uncovered to prevent overheating.